The Fender2step is made from very strong marine grade PVC integrally moulded to solid rope holds.
Fender2step uses high grade metal valves with protective dirt/salt screw caps integrated within the rope holds.
Every Fender2step is immersion tested prior to despatch, to ensure that each one is leak free and air-tight.
Inflation pressure: 2 psi / 0.15 bar at 20C / 68F
Max load: 100 kg / 225 lbsEye diameter: 18mm
Standard Colours: White & Blue & Navy Blue.
Fender2step Height: 560 mm Width: 450 mm Depth: 180 mm Weight: 2.5 kg.
Attach the FenderStep to your boat and use only as follows:
Separately tie two minimum diameter 10mm (3/8") ropes using a carefully formed bowline knot to each rope hold.
Securely tie the other end of each rope to suitable strongpoints on the boat, never use only a single point.
Ensure the step is level and that all the knots are fully secure prior to every use.
Do not use the FenderStep for any loads exceeding a total 100kgs or 225lbs.