Owatrol Deks Olje D.2 Flexible High Gloss Finish

Deks Olje D2 may be used on any kind of woodwork above the waterline. Provides a varnish-
like but flexible, gloss finish.

Application:

To Wood Already Treated With D1:
Do not thin.
Use a good varnish brush or roller.
Deks Olje D2 should be applied in a minimum of 6 rich coats.
Allow at least 12 hours of good drying between coats, i.e. one coat per day.
The six coats should be applied within one month.
No sanding needed between coats.
If possible, allow to dry for three to four days before using.
When applying D2 the air temperature should not be below 8-10ÃC (45-50ÃF)
Do not apply in wet weather or late in the day when dew or fog may be expected. These
conditions may dull a newly set film of D2 or cause it to 'blush'. (Exposure to sunlight will
usually remove this discolouration)